Cousin's 2100-SRT Turntable Semi-Auto Wrapper (Low Profile - W/ Ramp)

Cousin's 2100-SRT Turntable Semi-Auto Wrapper (Low Profile - W/ Ramp)

SKU: CO-2100-SRT

Cousin' SRT-2100 Turntable Semi-Automatic Low Profile Wrapper 


 Production Speed:

• 1-35 loads per hour (Single Turntable)
• NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

• Maximum load weight: 4,000 lbs dynamic - 10,000 lbs static
• Maximum load size: 50" W x 50" L (71" max. load diagonal) x 80" H (plus up to 4" top overlap)

• 57" diameter laser-cut steel plate with surround deck protection
• Maintenance free - 42 roller bearing support system
• Turntable height 2.75" from floor
• ANSI # 50 direct chain drive c/w chain tensioner
• 3-12 RPM rotational speed c/w soft start acceleration
• 1/2 HP AC variable speed motor
• Final revolution deceleration and positive stop alignment
• Rugged surround deck for added protection, 3 sided loading and pit mounting
• Front and back forklift ports for easy movement
• Accu-Count exact turntable positioning system for additional film savings!
• Optional loading ramp 60" long x 48" wide complete with 10" level porch area available

Film Carriage Elevator
• 1/2 HP AC variable speed motor
• ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
• Maintenance free carriage guidance system

Film Delivery System
• NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage
• Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
• 1/2 HP AC variable speed motor
• Fully electronic dynamic dancer corner compensation
• 33% to 313% fixed stretch capability
• Pre-stretch ratio variable using easy sprocket change
• Carriage Descent Obstruction Safety Shut-Off Device
• Rapid Thread ™ Safety Door with auto power cut-off switch
• Side mounted film carriage for operator convenience and safety
• Superior film-to-roller contact area
• Lifetime warranty on pre-stretch rollers

Electrical Input Requirements
• 115 Volts 1 Phase 60 Hz 15 Amps


Control Features:

• Electronic controls with LCD operator interface
• Power Off - On - Reset switch & Power On indicator light
• Single button Auto Wrap Cycle Start/Pause
• Cycle Pause for applying top sheets
• Reinforce Wrap control for mid-wrapping
• Base or Top Wraps First program
• Up Only or Up/Down wrap program
• Emergency Stop button
• Turntable Jog button
• Film Carriage Lower & Raise buttons
• Film Tension (Force-to-Load) control
• Separate film carriage raise & lower speed controls
• Operator programmable turntable speed control
• Triple beam automatic load height detection sensor for dark or shiny loads
• Separate 1 to 12 revolution top & bottom wrap control
• Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
• A - B - C wrap program selector with capability to input and store unique wrapping parameters for each program

Structural Features
• All structural steel construction
• Forklift truck portable base structure design - lifting tubes included for front and rear access
• Structural steel tube machine tower with sheet metal covers
• Electro-static powder coated paint finish